Temperature Probes

Approx. Rs 20,000 / PieceGet Latest Price

• Sensitive design
• Fast Action
• Durable

• Multi Purpose 1 Channel NTC Thermometer
• Audible alarm settable if limit value exceeds
• EN 13485 certified for specific foods & pharmaceutical applications
• Choice of probes available for different application

Additional Information:

• Item Code: testo-720
• Delivery Time: 2-3WEEKS

Approx. Rs 9,200 / PieceGet Latest Price

• Spring-loaded jaw for secure grip on pipes; 0.25" (6.35 mm) to 1.5" (38 mm) diameter
• For use with any Thermometer or Multimeter with a Type K input
• TP200: -4 to 200°F (-20 to 93°C) TP400: -4 to 450°F (-20 to 232°C)
• Basic accuracy of ±5%FS (TP200) and ±3.6°F/1.8°C (TP400)
• Complete with attached 36" (0.9 mm) cable and Type K connector

Approx. Rs 86,000 / PieceGet Latest Price

• On-line testing without disconnecting battery
• Datalogger stores up to 999 tests manually or 9600 sets in continuous mode and download readings to your PC with using software (included)
• Simultaneously measures DC Voltage and AC Milliohms
• Long battery life 7 hours; Auto Power Off to save battery
• 2-year warranty
• Complete with software with cable, Kelvin alligator clips, Kelvin test leads, and 6 AAA batteries

Approx. Rs 8,400 / PIECEGet Latest Price

• True RMS for accurate AC measurements
• 0.5% basic accuracy
• Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals
• LoZ prevents false readings caused by ghost voltages
• Built-in Non-Contact AC Voltage Detector (NCV) with LED indicator
• Data Hold freezes the reading on the display
• Min/Max/Max-Min captures highest and lowest readings and the difference between them
• Relative Mode for Capacitance Zero and offset adjustment
• Continuity and Diode Test • Auto Power Off conserves battery life
• CAT III-600 V safety rating • 3-year warranty

Approx. Rs 57,000 / PieceGet Latest Price

• Two 0 to 30 V/0 to 5 A outputs with selectable Constant Voltage and Constant Current modes
• Outputs up to 60 V in series mode or 10 A in parallel mode
• Two auxiliary outputs with fixed current of 3 to 6.5 V/3 A and 8 to 15 V/1 A Overload and short circuit protection

Approx. Rs 37,500 / PieceGet Latest Price

• Dual 4-digit LED display, Front/Rear output terminals, and Lock/Unlock front panel
• Constant Voltage or Current with 3 user programmable presets
• Upper voltage and current limit setting to protect UUT (Unit Under Test)
• Output on/off switch with Power Up Output; On or Off status setting
• Remote Sensing for accurate applied voltage at the load point
• Parallel connection to other units for Master/Slave control

Approx. Rs 28,700 / PieceGet Latest Price

• Simultaneous 20,000/2,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter of Q (quality), D (dissipation) R (resistance), θ (phase), or ESR (equivalent series resistance)
• Auto Select measurement function with 1 kHz default test frequency
• Five test frequencies
• Set Hi/Lo limits using absolute values or percentage limits
• Relative function, Auto power off with disable, Low battery and over-range indicators
• Parallel or Series equivalent circuit
• Built-in test fixture or use external test leads
• Open and Short calibration removes unwanted stray impedances from the measurement
• 2-year warranty
• Complete with test leads and 9 V battery
• Optional SMD Tweezer (LCR203) and plug-in SMD Component Fixture (LCR205)

Approx. Rs 11,500 / PieceGet Latest Price

• Insulated inductive probe prevents shorting conductors
• Tests wire trace, continuity test, clear/busy/ringing line test and tip/ring identification
• Alligator clips for non-terminated cables and modular connectors for direct connections to telephone and internet wiring
• Built-in speaker with sensitivity control

Approx. Rs 2,800 / PieceGet Latest Price

• Transmitter with output cables terminated in modular RJ11 phone connector Transmitter injects traceable signal into cables, checks telephone lines, and performs continuity checks
• Non-Contact probe audibly identifies selected wire or cable
• Test for properly operating phone lines
• Adjustable sensitivity control improves wire identification and eliminates false detection 
• Continuity test — visible indication

Approx. Rs 4,300 / PieceGet Latest Price

• Plug the Transmitter tester into an outlet and locate the correct breaker at the electrical box
• Manual sensitivity adjustment to pinpoint correct circuit breaker
• Transmitter & Receiver snap together for storage
• Transmitter/Tester: - Tests GFCI circuits - Tests Reversed/Open Connections, - LED indication of 2 test conditions and 6 wiring faults - Lights indicating circuit condition